Description
Atoll SDA200 : Integrated Amplifier/DAC/Streamer
Whether it’s listening to music in high definition streaming, locally from your network, from a USB key, from a hard drive, via Bluetooth®, or via your favourite internet radios, our “All-in-one -un » SDA200 Signature is fully adapted to current needs related to the playback of dematerialized music files. In addition, it has very complete connectivity. Finally, the SDA200 Signature integrates a high-performance converter and the amplifier part of the IN200 Signature.
- 8 mm brushed aluminium front.
- 2 toroidal transformers of 340 VA each.
- Total of capacitors: 65 800 µF.
- 2×120Wrms / 8Ω.
- MOS-FET dual push-pull power stage.
- High-quality, shielded MKP technology link capacitors.
- Filtering capacitors: 8×6800 μF high quality, low ESR specific for ATOLL.
- BURR-BROWN PCM1792 converter:
– Dynamic: 129 dB.
– Signal/Noise ratio: 129 dB. - 5″ TFT LED colour graphic display (800*480).
- Discrete component preamp stages without negative feedback in pure Class A.
- Analog volume management (switched resistors) that can be bypassed.
- Specific power supply dedicated to the audio stages.
- Specific power supply dedicated to the analogue digital audio converter.
- Accepted resolutions: PCM up to 24 bits/192 kHz and DSD64 and DSD128.
- Playback of audio files present on the network (DLNA and UPnP compatible) in a wired RJ45 or WiFi connection.
- Display of names, tags, resolutions and album covers.
- “Gapless” system (no cut between pieces).
- Ability to create playlists.
- USB-A file systems: FAT32, NTFS, EXT2/3/4.
- ATOLL “streamer” remote control supplied as standard.
- “ATOLL Signature 2” App (Android and IOS).
CONNECTIVITY
Inputs
2 Analog inputs – 2 coaxial S/PDIF (PCM1792 24 bits/192 kHz).
2 Toslink optical S/PDIF inputs (24 bits/192 kHz PCM).
2 USB-A inputs (1 front and 1 rear).
1 RJ45 network socket.
1 Bluetooth® receiver (antenna).
Outputs
Speakers.
1 Pre-out output.
1 Coaxial S/PDIF output.
1 Toslink optical S/PDIF output.
1 Trigger output 12V.
1 Headphone output on the front panel (Ø 6,35 mm – 1/4″).
1 Wi-Fi antenna (802.11b/g/n).
Specifications :
Power supply: 689 VA
Wrms/channel/8Ω: 2×120 W
Wrms/channel/4Ω: 2×200 W
Total of capacitors: 65,800 μF
Dynamic: 129 dB
Input impedance: 220 kΩ
Maximum input level: 3,5 Vrms
Distortion at 1 kHz: 0,05% / 10 W
Bandwidth: 5 Hz – 100 kHz
Rising time: 2.0 μs
Sensitivity: 350mV
Signal/Noise Ratio: 129 dB
D/A converter: BURR-BROWN PCM1792 24-bit/192 kHz
Dimensions: 440×365×95 mm
Weight: 13 kg
