Description
Townshend Seismic Isolation Pods : Decoupling
Price for 4 pieces
- Seismic Sink Corners provide vibration isolation for almost any equipment rack, stand, platforms or speaker. Each Corner is a small platform suspended from two Seismic Load Cells™ on which the equipment legs or spikes are placed.
The Importance of Vibration Isolation
Vibrations affect the reproduction of sound through hi-fi systems. Although many of these are small and may go largely unnoticed, vibrations have a negative impact on the quality of sound in virtually all hi-fi components.
- Turntables are highly sensitive to vibration, which raises the noise floor, degrading the sound not to mention stylus jump due to footfall.
- With silver-disc players, vibration affects the laser mechanism and the crystal oscillators introducing severe sound-degrading jitter.
- With tube or valve amplifiers vibration rattles the microphonic electrodes, especially the grids.
- Transistor amplifiers have microphonic components, including capacitors and connecting wires which move relative to one and another generating rogue voltages. All of these mechanisms will degrade the delicate audio signal.
- Computers, streamers and DACs are highly susceptible to mechanical noise as they all contain vibration sensitive crystal oscillators.
Rigidly spike or cone mounted speakers transmit energy into the floor radiating vibration throughout the room and ultimately, through your rack and into your equipment. This seriously degrades performance as described above. Spike and cone mounted speakers cause the whole room structure to vibrate, often resulting in an unrealistic boomy bass whilst masking subtle detail. Further, this unwanted structural vibration can seriously irritate your neighbours. Designed to float your existing equipment rack in an unobtrusive manner, the Seismic Isolation Corners slip discretely under the bottom corners of your support furniture and bring you all the benefits of Seismic Isolation without major upheaval.
The secret is to fully float your whole Hi Fi System independently from the speakers and the floor. Townshend have devised a complete solution that to allow this to be done in an optimum way.
Seismic Load Cell™
The key component is the Townshend Seismic Load Cell™. The Seismic Load Cell™ consists of a high quality alloy steel compression spring surrounded by a flexible synthetic rubber jacket with two end plates. Screw threads in each plate facilitate height adjustment and provide attachment points. A movement-sensitive, air-resistance damper rapidly dissipates low frequency oscillation caused by disturbing the suspended equipment. Seismic Load Cells™ are very ‘soft’ and allow free movement in all three dimensions; up/down, left/right and back/forth. This unique solution blocks all deleterious vibration from 3Hz upwards and from all directions. As the frequency increases, the isolation gets progressively greater, ensuring that virtually no vibration can pass from and to the suspended equipment. As each hi-fi component is isolated, the sound progressively improves.
The Seismic Isolation Podium is available in two standard styles:
- Style 1 is for spikes and cones.
- Style 2 is for flat feet.
Specification :
- Eliminates structure-borne feedback between speaker and vibration sensitive equipment
- Enhances clarity throughout the whole frequency range
- Produces a wider and deeper sound stage
- Improves bass definition
- Allow for neighbour friendly high level listening
- Four Corners units are able to hold equipment weighing up to 240kg
- Sold in sets of 4
- 12 Month Warranty
