Skip to main content

Eversolo DAC-Z10

 1.980

Eversolo DAC-Z10

Catégorie :

Description

Eversolo DAC-Z10 : DAC

  • Fully Isolated Architecture (FIA™), which completely separates the digital and analogue domains to minimise interference and preserve signal purity.
  • Three independent linear power supplies individually power the left channel, system, and right channel, allowing each to operate in an ultra-low-noise environment.
  • Two sets of AK4191 + AK4499 DACs for independent left and right channels – AKM’s Velvet Sound™.
  • Fully balanced analogue preamplifier that employs precise dual-channel R2R volume control.
  • Eversolo Precision Core™ OCXO Temperature-Controlled Crystal Oscillator + Phase-Locked Loop Technology with External 10 MHz & 25 MHz High-Precision Clock Support.
  • FPGA Redefined – A built-in FPGA that shapes IIS data and refines the clock. Every digital signal is thus optimised to its purest form before reaching the DAC.
  • Grounding Post – The grounding post channels noise away, eliminating even minor interference and preserving the purity of each note.
  • 8-Mode IIS Digital Audio Input – Via IIS digital audio input, offers 8 switchable modes and supports up to 768kHz/ 32Bit PCM and DSD512 Native.
  • Isolated AES/EBU Input – Features a dedicated isolated AES/EBU input, fully separating electrical noise between front-end and back-end devices.
  • HDMI ARC Integration – Equipped with HDMI ARC, supporting both ARC and eARC modes for effortless integration into your home theatre system.
  • 6.35mm Powerful Headphone Amplifier Module – Dedicated 6.35 mm headphone amplifier module that auto-detects impedance and adjusts gain.
  • High Quality Bluetooth Module – Features a built-in Qualcomm QCC5125 Bluetooth module.
  • 8.8-inch IPS touchscreen.
  • Left/Right Balance Gain – Offers up to 15dB of left/right balance gain adjustment.
  • Customise Your Sound – Offers 6 DAC filter characteristics, letting you switch freely to suit different musical atmospheres.
  • Full Function Remote Control.
  • High Quality USB and Trigger Cables Included.

Model : Eversolo DAC-Z10

Display : 8.8″ IPS

Chassis Material : Aluminium alloy

Main Processor : DCP8568

DAC : Left Channel: AK4191+AK4499 / Right Channel: AK4191+AK4499

Audio Processor : Multi-core USB audio processor

OPA Chip @ OPA1612

Power : Triple ultra-low noise linear power supplies

Bluetooth Audio Input

Qualcomm QCC5125 Bluetooth module, Bluetooth version: BT5.0; supports SBC/AAC Bluetooth audio protocols

USB-B Audio Input

Compatible with Windows 10 and above, macOS, Android, and iOS; supports up to Stereo DSD512 / PCM 768kHz 32Bit

IIS Input

Supports 8 mode configurations, up to Stereo DSD512 / PCM 768kHz 32Bit

AES/EBU Input

Up to Stereo PCM 192KHz/24Bit / DSD64 DoP

Optical Audio Inputs *2

Up to Stereo PCM 192KHz/24Bit / DSD64 DoP

Coaxial Audio Inputs *2

Up to Stereo PCM 192KHz/24Bit / DSD64 DoP

ARC Input

Up to Stereo PCM 192KHz/24Bit

Analogue Audio Inputs

XLR (Balanced), RCA

Analogue Audio Outputs

Pre-out: XLR (Balanced), RCA; Headphone out: 6.35mm single-ended

External Clock Input

Supports 10M/25M clock inputs with 50Ω or 75Ω impedance

Recommended Headphone Impedance

16–300Ω (Low Gain: 16–32Ω / High Gain: 32–300Ω)

XLR Output Audio Characteristics

  • Output Level (Vrms): 5Vrms @ 0dBFS
  • THD+N @ No-wt: 0.00008% @ 1kHz (-122dB @ 1kHz)
  • Noise @ No-wt: <1.2uVrms
  • SNR @ A-wt: 130dB
  • Frequency Response: 20Hz–20kHz (±0.1dB)
  • Crosstalk: -130dB
  • DNR @ A-wt: 130dB

RCA Output Audio Characteristics

  • Output Level (Vrms): 2.5Vrms @ 0dBFS
  • THD+N @ No-wt: 0.000097% @ 1kHz (-120dB @ 1kHz)
  • Noise @ No-wt: <1.5uVrms
  • SNR @ A-wt: 128dB
  • Frequency Response: 20Hz–20kHz (±0.1dB)
  • Crosstalk: -123dB
  • DNR @ A-wt: 128dB

Headphone Audio Characteristics (Low Gain Mode)

  • Output Level (Vrms): 4Vrms @ 0dBFS
  • THD+N @ No-wt: 0.0003% @ 1kHz (-110dB @ 1kHz)
  • Noise @ No-wt: <2.5uVrms
  • SNR @ A-wt: 124dB
  • Frequency Response: 20Hz–20kHz (±0.1dB)
  • DNR @ A-wt: 124dB

Headphone Audio Characteristics (Mid Gain Mode)

  • Output Level (Vrms): 5.6Vrms @ 0dBFS
  • THD+N @ No-wt: 0.00018% @ 1kHz (-115dB @ 1kHz)
  • Noise @ No-wt: <2.5uVrms
  • SNR @ A-wt: 126dB
  • Frequency Response: 20Hz–20kHz (±0.1dB)
  • DNR @ A-wt: 126dB

Headphone Audio Characteristics (High Gain Mode)

  • Output Level (Vrms): 7Vrms @ 0dBFS
  • THD+N @ No-wt: 0.00013% @ 1kHz (-118dB @ 1kHz)
  • Noise @ No-wt: <2.5uVrms
  • SNR @ A-wt: 127dB
  • Frequency Response: 20Hz–20kHz (±0.1dB)
  • DNR @ A-wt: 127dB

Power Supply : AC 100~240V 50/60Hz

USB Port : USB2.0*1(only for firmware upgrade)

Control Methods : Touchscreen control, remote control, mobile App control

Rated Power Consumption : 32W

Dimensions : 365mm (L) × 310mm (W) × 78mm (H)

Packing List

Remote control ×1, power cable ×1, USB data cable ×1, USB drive (for FW upgrade) ×1, TRIGGER cable ×1, polishing cloth ×1, user manual ×1

Brand

Eversolo